Spot Free Car Wash System 50 | Deionized Water DI Rinse | Bypass Head | TDS Incl

Description

Yacco GEARBOX RACE Synthetic Oil 2 and 4 Stroke Motorcycle 1L Premium French Oil
Spot Free Car Wash System 50 | Deionized Water DI Rinse | Bypass Head | TDS Incl
Say goodbye to water spots with our Spot Free Car Wash System 50 | Deionized Water DI Rinse | Bypass Head
Stop paying for over priced cartridges, our systems use bulk resin that can be purchased by the cubic foot to refill. Making the longer term cost of our system much cheaper.
Our Bypass system allows you to easily turn the water treatment on and off. Simply turn both red dials inward to bypass the resin treatment. This means you can use DI water when you need it and unfiltered water when you don't which will further prolong the life of your resin. We suggest using DI water water for your final rinse and to fill your buckets and foam cannon.
So how does it work and how long will it last? Please review our FAQ below to learn more!
How does the the system work?
Our ultra pure deionization tanks used mixed bed DI resin to remove all spot causing minerals from the water fed to the tank. The water produced is an excellent use for a spot-free car and RV wash, window cleaning, and much more! Our system removes impurities from your water that can cause water spots. These impurities are called Total Dissolved Solids (TDS).
How long will the system last?
This is the number 1 question we get asked. The answer is based solely on the TDS of your feed water going into the system, which is measured in PPM. Once you have this number you can use our chart below to estimate how long one tank of resin will last you.
How do I find the PPM of my feed water?
Use a TDS meter to quickly and easily get this number. We have them available: TDS Meter | Measure Your Waters PPM | For Spot Free Wash Systems
What happens when the resin in my tank is at the end of its life?
Since our system is filled with bulk resin it can easily be emptied and refilled when the time comes. Scroll down further for more info on refilling your tank.
We suggest grabbing one of our funnels made for the tanks for refilling
How do I know when the resin needs to be replaced?
Use your TDS meter to measure the PPM on your treated water at least monthly. Once the PPM number starts to rise it is time to exchange your resin.
Where do I get replacement resin?
Our 1/2 Cubic Foot will refill the 50 system once: Spot Free Wash DI Rinse Replacement Resin | 1/2 Cubic Foot Refill For DI50
Our 1 Cubic Foot will refill the 50 system twice: Spot Free Wash DI Rinse Replacement Resin | 1 Cubic Foot Refill for DI100
My house has a water softener is this different?
Yes it is. Home water softeners do not filter all TDS/Minerals so in most cases you will still have water spotting. A water softener will typically lower your feed waters TDS number which will make the resin last longer though.
Spot Free Car Wash System 50 | Deionized Water DI Rinse | Bypass Head Technical Data
Resin Capacity: .5 Cubic Foot
Due to the current shortage of tanks exact dimensions may vary slightly on the tanks used.
Inlet/Outlet: 3/4" GHT (male) A female adapter is provided so you can use 2 standard hoses.
Capacity
The capacity of a DI tank is dependent on the quality of the water fed to the tank. The worse water fed to a DI tank, the less amount of gallons of pure water it will produce. The better the feed water, the more gallons of pure water the DI tank will produce. The following chart is to be used as a reference only, as to how many gallons a DI tank of this size will produce.
Feed Water Quality
PPM
Feed Water Quality
us/cm
Approx. Gallons
Produced
5.0
7.8
16,082
20
31
4,020
50
78
1,555
100
156
777
200
313
390
300
468
260
400
588
195
500
762
155
600
853
130
1,000
1,560
78
Service Flow Rate: 3.0 GPM Max
Max Pressure: 125psi
Max Temperature: 120 Degrees F
Common Sense Warning: These tanks are full of water and can not be allowed to freeze
To replace your resin, first unscrew and remove the black head from your tank and follow the simple instructions on our site
Return Policy
Brand new items in the original packaging can be returned within 14 days of purchase for any reason. Because we offer the lowest allowable advertised price and shipping on our items a 15% restock fee will be charged on all returned items and the buyer will be responsible for the return shipping.
Fluids can only be returned in unopened condition. If the factory seal has been broken the item can not be returned.
All returned items will be inspected, used/installed items or items not in factory packaging will be declined. Fluids that the factory seal is opened on will be declined.
Store Policies
The Clean Garage does not manufacturer or warranty any of the items listed. All products are warrantied orby the manufacturer, if you should encounter any concerns or warranty issues with the products purchased please contact us by message  and we will assist you in having the manufacturer address your concern.
We only remove items from inventory if they are discontinued. If there is a delay in the item you ordered we will contact your promptly with an updated time frame and offer to back order the item or issue a complete refund.
We suggest you always contact us before purchase to verify fitment and current stock for the item you are interested in to avoid delays.
Items may be drop shipped direct from the manufacturer, this may cause additional shipping time depending on where you are located and where the nearest warehouse that has your items in stock is located. If you need your items by a certain time we suggest you always contact us before to verify current shipping location and time.
Items pictured may be a "stock image" meaning they may not be the exact size of the items listed. This can alter the appearance of the product you receive (for example the lip size of the wheel or package size of your Fluids) We do our best to post the most accurate image available from the manufacturer, if you have a question about the specific appearance of the item you are ordering please message or email us before ordering.
The items we sell should always be installed by a trained professional and should be verified with them before ordering. Always consult your vehicles owners manual for the proper fluid to use.
As you can tell by now the best practice is to contact us before if you order if you have any questions about fitment, availability, shipping times or anything else. Our goal is to make sure you are 100% satisfied with the complete order process and communication is the best way to do that. Thank you for considering making you purchase with us, we appreciate your business!
Please make sure you check out our complete line of products including the best selection of Premium Car Care Products, Synthetic Oils, Custom Wheels, Automotive Lifestyle Apparel and Performance Parts!